IOWA CITY MODERATED FORSALE NEWSGROUP > Tools
> Hand Tools
> Resistor,variable,nonwire wound,nonprecision
Resistor,variable,nonwire wound,nonprecision
ELECTRICAL RESISTANCE PER SECTION - 1.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT - -10.0 TO 10.0 SINGLE SECTION
STANDARD TAPER CURVE PER SECTION - A SINGLE SECTION
MAXIMUM STOP TORQUE - 48.00 INCH-OUNCES
MAXIMUM STARTING TORQUE - 6.00 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS - 0.5 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER - 70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER - 120.0 SINGLE SECTION
BODY STYLE - 1B CYLINDRICAL BUSHING MOUNTED
BODY DIAMETER - 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
BODY LENGTH - 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
MOUNTING BUSHING LENGTH - 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
SHAFT STYLE - 3C ROUND, SLOTTED
SHAFT DIAMETER - 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM
SHAFT LENGTH - 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG - 292.0 MINIMUM AND 298.0 MAXIMUM
ACTUATOR TRAVEL CONTROL FEATURE - STOPS
NONTURN DEVICE RADIUS - 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
MOUNTING METHOD - STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR - UNEF
SCREW THREAD DIAMETER - 0.250 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH - 32.0
TERMINAL TYPE AND QUANTITY - 3 TAB, SOLDER LUG
RELIABILITY INDICATOR - NOT ESTABLISHED
TEST DATA DOCUMENT - 81349-MIL-R-94 SPECIFICATION
SPECIFICATION/STANDARD DATA - 81349-MIL-R-94/3 GOVERNMENT SPECIFICATION
III OVERALL LENGTH - 1.094 INCHES MAXIMUM
III OVERALL DIAMETER - 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE - MILR94-3
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE - RV6NAYSL102A
