IOWA CITY MODERATED FORSALE NEWSGROUP > Tools
> Hand Tools
> 2008
> Resistor,variable,nonwire wound,nonprecision
Resistor,variable,nonwire wound,nonprecision
ELECTRICAL RESISTANCE PER SECTION - 10.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT - -10.0 TO 10.0 SINGLE SECTION
STANDARD TAPER CURVE PER SECTION - A SINGLE SECTION
MAXIMUM STOP TORQUE - 128.00 INCH-OUNCES
MAXIMUM STARTING TORQUE - 6.00 INCH-OUNCES
POWER DISSIPATION RATING PER SECTION IN WATTS - 1.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER - 70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER - 120.0 SINGLE SECTION
BODY STYLE - 1B CYLINDRICAL BUSHING MOUNTED
BODY DIAMETER - 0.890 INCHES MINIMUM AND 0.922 INCHES MAXIMUM
BODY LENGTH - 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
MOUNTING BUSHING LENGTH - 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
SHAFT STYLE - 3C ROUND, SLOTTED
SHAFT DIAMETER - 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT LENGTH - 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG - 251.0 MINIMUM AND 318.0 MAXIMUM
ACTUATOR TRAVEL CONTROL FEATURE - STOPS
NONTURN DEVICE LOCATION - AT 9 OCLOCK
NONTURN DEVICE RADIUS - 0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM
MOUNTING METHOD - STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR - UNEF
SCREW THREAD DIAMETER - 0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH - 32.0
TERMINAL TYPE AND QUANTITY - 3 TAB, SOLDER LUG
TERMINAL LOCATION - RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
RELIABILITY INDICATOR - NOT ESTABLISHED
TEST DATA DOCUMENT - 81349-MIL-R-94 SPECIFICATION
SPECIFICATION/STANDARD DATA - 81349-MIL-R-94/4 GOVERNMENT SPECIFICATION
III OVERALL LENGTH - 1.281 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
III OVERALL DIAMETER - 1.274 INCHES MAXIMUM
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE - MILR94-4
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE - RV2NAYSD103A
