IOWA CITY MODERATED FORSALE NEWSGROUP > Industrial Equipment
> Light Industrial
> #642 connecticut electric 20 amp federal pacific single
#642 connecticut electric 20 amp federal pacific single
#642 Connecticut Electric 20 Amp Federal Pacific Single Pole
Connecticut Electric 20 Amp Federal Pacific Single Pole Thick Circuit Breaker Using wire size #12-2 copper with ground, this 20 amp, 120 Volt, single pole, thick series StabLok replacement breaker is suitable for use in a Federal Pacific Electric load center. Typical applications, up to 2200 watts, include kitchen circuits, branch circuits, wall receptacles, electric heaters (up to 1650 watts), dishwashers, refrigerators, freezers, washing machines, window air conditioners (110 Volt, up to 5500 BTU), and electric motors (3/4 hp to 1-1/4 hp). These are only suggested applications and cannot assure your compliance with all local codes. Please check local electrical codes before starting any electrical project. Federal Pacific Electric and StabLok are registered trademarks of American Circuit Breaker Corporation.
* Type F for use in Federal Pacific Loadcenters
* MFG Brand Name : Connecticut Electric
* Assembled Depth (In Inches) : 3.25 In.
* Assembled Height (In Inches) : 3.0
* Assembled Width (In Inches) : 1.0
