IOWA CITY MODERATED FORSALE NEWSGROUP > Electronics
> Consumer Electronics
> Old
> 2009
> 858 smd rework hot air desolder station fix viewsat 850
858 smd rework hot air desolder station fix viewsat 850
858 SMD REWORK HOT AIR DESOLDER STATION Fix Viewsat 850
858 Rework Hot Air Gun Station
State-of-the-Art design for entry level or industry professional
Much better than other old model 850.
Come with 3 different size of tip.
1. Closed circuit Sensor, Microcomputer zero crossing soft touch temperature control, LED visual display, high power, rapid rise of temperature, accurate and stable temperature, little influence of air outflow, and unsoldering without lead.
2. Adjustable airflow, large and soft airflow, easy adjustment of temperature, suitable for multiple usage
3. Hand handle with sensor switch, the system will turn into the working mode while the handle is held; and the system will standby while the handle is put on the holder, which is very convenient operation.
4. Automatic cooling function of the system will prolong the life of heating element, and protect the hot air gun.
5. Brushless fan with long lifetime, low noise.
6. When in use, the system will not deform the components with plastic, vibrator and some special sockets and also not bubble the PCB and discolor shielding covers. Besides, it will also not break the BGA ICs while working.
1. Apply to solder and desolder many component, such as TSOP, SOIC, CHIP, OFP, PLCC, BGA etc.
2. Apply to hot constriction, drying, divide lacquer, pre-heating, ice-out, solder pastern.
Luminous Discharge tube display indication
Microcomputer digital LED indication
Airflow Brushless fan with soft air
Luminous discharge tube of LED
Microcomputer digital LED (Resolution rate: 1 ?)
Component Length of Handle (inc. handle cord)
13.8 cm (Height) x 10 cm (Width) x 15 cm (Length)
