IOWA CITY MODERATED FORSALE NEWSGROUP > Electronics
> Consumer Electronics
> Old
> 16 pin idc dip connector flat cable assemblies 10 pc
16 pin idc dip connector flat cable assemblies 10 pc
16 Position Flat Cable Assemblieswith .300" Centerline DIP Plug Connectors10 Pieces Not the size that you need? Click here for more choices!
IDC Style Flat Cable DIP Plug Connector Cable Assemblies
* Emtel Part Number: ECA-DIP16DIP16-12-A
* Assembled length: 12" outside connectors (+/-1/4")
* Connectors: 16 position .300" DIP plug connectors (2), Emtel P/N 15-D16. Phosphor bronze contacts, UL94V-0 Material. Plugs into .300" wide IC socket or can be soldered directly to printed circuit board.
* Cable: Industry standard .050" centerline flat ribbon cable, UL2651 style VW-1, 300 Volt, 105 deg C. Emtel P/N 97-016
* Mates with .300" x .100" IC sockets
* Connector orientation: Pin 1 outside
* Color: Connectors-Black, Cable-Gray
* Gold flash over nickel plating at contact point
Other lengths, sizes, styles, and quantities are available.
Please click here to email with any questions or for information on a different cable assembly
Emtel Cable Assembly Part Number Builder:
A= Connector A Type (replace A with:)
D= D Subminiature (add M for male, F for female)
B= Connector B Type (replace B with:)
D= D Subminiature (add M for male, F for female)
O= Connector orientation (replace O with:)
C= Pin 1 outside/inside (connectors facing same direction)
26 position socket connector to 25 position D-Sub male, 24 inches long, pin 1 facing out both ends