IOWA CITY MODERATED FORSALE NEWSGROUP > Tools
> Power Tools
> LM2588 power switching regulator ic, 5A, flyback qty:3
LM2588 power switching regulator ic, 5A, flyback qty:3
Switching 5A Flyback converter / regulator
Achieve high-power voltage conversion with little heat.
Ripple frequecies easily filtered with low-value components.
(Full Application schematics in data sheet)
Requires few external components
Family of standard inductors and transformers
NPN output switches 5.0A, can stand off 65V
Wide input voltage range: 4V to 40V
Adjustable switching frequency: 100 kHz to 200 kHz
Draws less than 60 µA when shut down
Current-mode operation for improved transient response, line regulation, and current limit
Internal soft-start function reduces in-rush current during start-up
Output transistor protected by current limit, under voltage lockout, and thermal shutdown
System output voltage tolerance of ±4% max over line and load conditions
The LM2588 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3V, 5.0V, 12V, and adjustable.
Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.
The power switch is a 5.0A NPN device that can stand-off 65V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.
Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is guaranteed for the power supply system.
US: $3.75 Canada: $4.50 International: $5.50 Lowest cost option.
2-nd item: S&H 75% less than first (or 25% of first)
item nr 3-5: S&H 80% less than first (or 20% of first)
item nr 6-10: S&H 90% less than first (or 10% of first)
Be sure to add me to your favorites list!
