IOWA CITY MODERATED FORSALE NEWSGROUP > Industrial Equipment
> Meeco turbo 2 H20 analyzer ppb
Meeco turbo 2 H20 analyzer ppb
Accuracy: Inert mode 4% of reading or +/_ ppb which ever is greater
H20 Mode Whenever the measured value displayed on the LED reading is les than 50ppb the accuracy is 2% of the reading of +/_ ppb,
whichever is greater. When the measured value displayed on the LED reading is less than 50 ppb, the accuracy is 6% of the reading or +/- 5ppb
Sensitivity: One part per Billion with initial response in seconds
Resolution: 10ppt or 0.01ppb on LCD signal output
Operating Tempurature ranges: 32F to 122F, 0c to 50C
Signal inputs: two analog inputs readable through serial port
Signal outputs: 5-digit LED giving a 1 ppb resolution
LCD display giving 1% of reading resolution
Two 0-10 volt DC analog outputs; user difined and scaled
One 4-20 mA output; linked to one of the anolog outputs
RS-232 or RS-485 serial commications port
Sample inlet pressure: 5-3000 psig (0-203 Bar)
Permiation Tube Life: 12 months (18-24 months typical)
Alarms: All alarms are single-pole, Double-Throw Form C relays, 3A resistive; unless otherwise indicated
One Flow alarm; Single-Pole, Single-Throw
Power Requirements: 100-240 VAC
Compressed Air Requirments: 80-100 psi Max (5.4-6.8 Bar)
This unit was purchased for $19,000.00 NEW, And will require recalibration by Meeco, Cost for Recal will need to be determined by Meeco when you send it back to them.
My ROUGH Estimate of Cost will be between $1500 and $2500
Used: This unit was kept in a rack in a cleanroom environment and only used with inert gas.
This unit is very clean and well kept.
This unit will require recalibration from the manufacturer. The Manufacturer is Still IN BUSINESS AND MAKING SIMILAR UNITS
