IOWA CITY MODERATED FORSALE NEWSGROUP > Industrial Equipment
> Light Industrial
> Sst-pfb-slc profibus scanner for slc 500 series
Sst-pfb-slc profibus scanner for slc 500 series
This is a unopened factory sealed item.
The BradCommunications SST PROFIBUS scanner connects your
Allen-Bradley SLC 5/03 or higher controller to PROFIBUS as a master or slave to
scan or emulate PROFIBUS DP I/O.
A 9-pin serial port included on the scanner provides for firmware upgrades in the
field and the upload of I/O configurations.
The SLC’s processor logic scan and the PROFIBUS I/O scan are independent of
each other. The SLC processor reads the scanner input data during its input scan
and writes the output data during its output scan. The scanner continues reading
input data from the slaves and writing output data to the slaves independent of
what the SLC is doing. Slave status, diagnostic status information on all slaves,
network diagnostic counters and DP Master diagnostic counters are maintained
by the scanner. The scanner does not require the set up of a G-file in the SLC.
