IOWA CITY MODERATED FORSALE NEWSGROUP > Electronics
> Industrial Electronics
> Old
> Gear assembly,speed decreaser
Gear assembly,speed decreaser
Genuine U.S. Military Issue Surplus
Lockheed Martin Corp. P/N: 77C719142P1
There are 3 shafts, each shaft is 1" diameter x 3".
Each shaft has a key slot that is 1/4" wide x 2 1/4" long x 1/8" deep.
The shafts appear to be stainless steel.
The housing appears to be aluminum.
The unit is Unused, though some of the paint has come off.
*****************************************************************************************************************
There is not a name plate on the unit that states the gear ratio.
It appears to be for every 2 turns that the input shaft makes, the output shaft's make 1 turn.
The width of the housing between the 2 output shafts is 6 1/2".
The housing from the input shaft to the back of the unit is 8 1/8".
The height of the housing in approximately 4".
The shafts can go either clockwise or counter clockwise.
*****************************************************************************************************************
Camo / BDU clothing Sizes from XS to 6XL!!!
Items are being added weekly, so bookmark this page & return often, for you will never know what we`ll have for sale!
Thank you for understanding this and we apologize for any inconvenience that this may cause you.
*****************************************************************************************************************
