IOWA CITY MODERATED FORSALE NEWSGROUP > Electronics
> Industrial Electronics
> Galep-5 eprom device programmer rom burner free ship
Galep-5 eprom device programmer rom burner free ship
Galep-5 EPROM, GAL, and Device Programmer ~ New Item! Looking for EPROMs? Please click here!
Galep 5 Palm Sized Programmer with Universal I/O Capability
HIGH-SPEED Hardware: * GALEP-5 is uncompromisingly designed for speed. The programming algorithms run on an internal 200 MIPS ARM-9 processor under Embedded Linux. The processor directly controls the pin drivers via an FPGA, which ensures the perfect adaptation of the components to the programming algorithms. The FPGA (user-programmable logic) allows the realization of State Machines, UARTs etc. and thus supports time-critical components that wouldn't be programmable at all with pure software solutions. The programming cycle times are extremely short, close to the specified minimum times of the components. The internal 64 MB RAM serve as data storage and allows you to transfer the data only once for programming multiple devices.
* A universal pin driver circuit especially designed for GALEP guarantees optimal signal quality for the component to be programmed. Each of the 48 pins carries the following signals:
Logical high, adjustable between 1.3V ... 5.0V
Logical input, threshold adjustable between 0.5V … 5.0V
Three independent programming voltages up to 25V
Three switchable resistors for pullup and pulldown
* The switching regulators for the programming voltages are controlled by D/A converters in 100 mV steps. Further D/A converters are used to control the logic levels (1.3V ... 5.0V) and the input threshold (0.5V … 5.0V). All voltages are permanently monitored by an independent coprocessor.
* A universal pin driver concept with as many pins as possible reduces the requirements of adapters and thus ensures an overall low cost programming system.
* GALEP-5 is powered through the USB bus and does normally not require any additional power supply. The USB current limit of 500mA is kept. Some old NMOS components and some microcontrollers consume more than 500 mA. Those components are marked in the software. For ensuring USB compatibility we recommend to use the included power supply, or insert batteries (6xAAA) for such components.
* The signals for in-system programming (ISP) can be taken from a separately available ISP adapter or directly from the 48-pin ZIF socket. The help system provides information about the wiring of the target system for all supported components.
* GALEP-5 continues the established concept of the GALEP-32 software. The program runs under Windows 95, 98, ME, NT4, 2000, XP, and Vista. it features a comprehensive set of basic functions such as read, program, compare and delete, along with easy-to-use custom configuration options for any special functions required by the selected component. The editor allows a multitude of functions for editing component contents which can be saved and loaded in binary, Intel-hex, Motorola-s or JEDEC file format. Mass production is supported by providing statistics functions and serial number generation.
* Delete, program and verify components with JTAG interface (joint test action group, IEEE Std. 1149.1 ). The following formats are supported: SVF-Script in XSVF(Xilinx) format; JAM byte code player (ALTERA).
* The software is permanently improved for supporting new components. If you need a certain device that's not yet supported, use the free Device On Demand Service located at www.conitec.net . Free updates are available online in monthly intervals.
* Prior to each function, GALEP-5 checks the power consumption, correct positioning, and the contacts of all pins of the selected component. This prevents accidental damage to the component or the device.
* GALEP-5 programs all components in DIL sockets up to 48 Pins between 300 … 600 MIL (ca. 7,5 … 16 mm) wide, without additional adapters. Modern electronics products however contain mostly SMD components. Universal SMD adapters are available for all components with up to 48 pins. Only one adapter per socket is required; few adapters = small system costs!
* Adapters for components with more than 48 pins are also available. All GALEP-4 adapters can be used with GALEP-5!
Looking for a special socket adapter? Please click here!
Pocket format: ca. 80 x 115 x 33 mm (+7mm socket)
48-pin ZIF socket with 48 universal pin drivers
Programs low-voltage components down to 1.3V
Battery compartment for 6xAAA batteries
200 MIPS ARM-9 RISC processor, 64 MB RAM, 8 MB Flash
3 linear voltage regulators for internal power supply
4 switching regulators for programming voltages
2 linear voltage regulators for logic levels and input threshold
2 Microcontrollers for interal voltage monitoring
8-channel D/A converter, 16-channel A/D converter
PC or Laptop with Pentium Processor
Windows 95 / 98 / ME / NT4 / 2000 / XP / Vista
Check out the Galep-4 programmer!
Computer Parts and Accessories
Crystals, Oscillators, and Filters
Hobby, Tech and Prototype Items
Breadboards, Tools and Supplies
Click here to email with any questions